Residential Mold Detection & Removal Services

One of the worst contaminants known is the silent but dangerous growth of mold. Mold can grow indoors on wet or damp surfaces, such as wallpaper, ceiling tiles, carpets, insulation material, wood and drywall.



Don't let your home and health be ruined with mold!

Mold is present everywhere in nature, but when it finds its way into your home it can be a major problem. We use infrared technology as part of the mold detection process and special chemicals to help remediate the mold and protect your home.





Why is mold a problem?

 

Structural Damage

Molds gradually destroy the things they grow on and can grow anywhere:

  • Foundation
  • Roof
  • HVAC system
  • Drywall
  • Gutters
  • Furnishings and more


 

Health Problems?

In your home, all molds have the potential to cause side effects:

  • Headaches
  • Breathing Difficulties
  • Skin irritation
  • Allergic reactions
  • Aggravation of asthma symptoms


SERVPRO of NE Albuquerque

If You See Signs of Mold, Call Us Today – (505) 828-3567

Understanding Mold

Microscopic mold spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mold from a home or business. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return. 
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Faster to Any Size Fire Disaster

A minor mold problem can quickly become a major infestation if left untreated. We can start the remediation process immediately after you contact us. A faster response lessens the mold damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

We are proud to be an active member of this community. SERVPRO of NE Albuquerque is locally owned and operated, so we’re already nearby and ready to help Northeast Heights residents and business owners with any size mold contamination.

We are proud to serve our local communities:

Highly Trained Water and Mold Restoration Specialists

We specialize in water and mold damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.  Learn about our water damage training and certificates.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (505) 828-3567

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mold Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of mold. Since mold can be hidden, we use various technologies to detect mold and hidden water sources. 

Step 3: Mold Containment

To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Northeast Heights, NM home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.

Step 4: Air Filtration

Our specialized filtration equipment allows our professionals to capture microscopic mold spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process. 

Step 5: Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.

Step 6: Cleaning Contents and Sanitizing

SERVPRO of NE Albuquerque will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mold infestations also cause a persistent musty odor, our professionals are also trained to remove odors and provide deodorization using fogging equipment.

Step 7: Restoration

During the remediation process, it’s often necessary to remove porous building materials like subfloors, drywall, and carpet. The restoration step returns your Northeast Heights, NM home or business back to normal. Depending on the severity of mold damage, the restoration step may involve minor repairs, such as replacing drywall, or it may involve a substantial reconstruction project.

SERVPRO knows Mold

In Northeast Heights, NM, SERVPRO of NE Albuquerque is ready to tackle and resolve any mold issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mold. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mold job. Reach us at (505) 828-3567 - We’re ready to activate our team to remediate your mold.